Reply within 24 hours

Vegetable banding machines: bundling greens without bruising them

Banding looks like the easiest job on the line, and it is the one that shows up
at the checkout as bruised stems and split leaves. A banding machine done wrong
is faster at damaging product than any other step.

The band is not the issue

The band itself almost never bruises a vegetable. What bruises it is the tension
and the way the bunch is fed. A band pulled tight enough to hold a bunch that is
packed too loose will cut into the stems and crush the leaves against each
other.

Get the bunch right first

The machine bands what you give it. If the operator grabs a handful and the
bunch is uneven, the band has to be overtight to hold it. Train the feed first:
a consistent handful, a consistent length, and the band barely has to work.

Tension and size

Set the tension so the band holds the bunch when you lift it by the stems, and
no more. If you can see the band digging into the product, it is too tight. The
band size should match the bunch diameter — a band that is too large just gets
pulled tighter to compensate.

A simple test

Band a bunch and lift it by the band, not the stems. If it holds, drop it from
waist height onto the bench. If it survives, the tension is right for the
journey to the shelf.

What to tell us

Send the vegetable, the bunch size, and the band width you run. We will match a
machine and a setting to the product, because a bander set for asparagus is not
right for spinach, and guessing costs you produce.

Tell us what you need to pack

Send your bag size, product weight and required output per hour. We will come back with a machine recommendation and an FOB price within one working day.

Email us Products